Pageant Decal | Personalized Pageant Mom | Heat Transfer Vinyl Decal

Celebrate and support your favorite pageant contestant with this customizable collection of pageant-themed items, perfect for gifting. Choose between vibrant DTF transfers for apparel, UV-DTF stickers with a glossy finish, or durable die-cut stickers, each personalized with the contestant's name alongside the name of their biggest fan. These high-quality, personalized items make a thoughtful and unique gift for pageant supporters, whether as a good luck charm before the event or a memorable keepsake after the competition. Show your support in style with these custom gifts that highlight the special bond between the contestant and their supporter.

NOTE:
DTF Transfers are intended for use on cotton, cotton blends, or polyester garments. UV-DTF and Die-Cut Stickers are intended for use on any hard and smooth surface, such as a tumbler, phone case, computer case, etc. UV-DTF Stickers are resistant to fading, scratching, and everyday wear.

• Please read the application instructions prior to purchasing your decal or sticker. The Tiger's Trunk cannot be held accountable for any incidents during the transfer or removal process.
  

• Heat Press Instructions for applying your DTF Transfer
  

1. For best results, we recommend using a heat press to apply DTF transfers.
2. Prepress garment for 5-10s to remove moisture and wrinkles.
3. Press at 300-320°F (for cotton or blends) or 260-270°F (for polyester) for 10-15 seconds.
4. Cool completely before peeling. Your design might feel slightly sticky and thick after being peeled, this is normal!
5. Once it has been peeled, re-press for 5-10s to lock in your design.

• Iron Instructions for applying your DTF Transfer

1. 1. For best results, we recommend using a heat press to apply DTF transfers; however, you may use an iron if necessary.
   2. Take your time and line up your artwork in the desired print area.
   3. Use the setting on your iron that corresponds with the material you are using. If necessary, increase heat toward the cotton/linen setting for adherence.
   4. Cool completely before peeling. Your design might feel slightly sticky and thick after being peeled, this is normal!
   5. Once it has been peeled, re-press for 5-10s to lock in your design.

• Instructions for applying your UV-DTF Sticker
  

1. Clean the product you are applying the transfer to thoroughly.
2. Use a squeegee or plastic card to firmly press the stickers from the back. This will ensure it is firmly adhered to the carrier sheet.
3. Peel the transfer off of the backing, ensuring all pieces lift off evenly.
4. Position the transfer and stick it onto the product.
5. Once the transfer is applied, remove bubbles or wrinkles with firm pressure using a squeegee or plastic card. 
6. After you smoothed the transfer out, apply pressure using your fingers to adhere evenly. 
7. Finally, peel off the clear layer on the front of your design diagonally.